Old Smaart Manuals, Case Studies, White Papers, etc
An archive of legacy Smaart related reference material generated over the years including manuals, tech notes, case studies and more.
User Manuals
- Getting Started with SmaartLive
- Getting Started with SmaartLive (En Española)
- FFT Fundamentals
- SmaartLive Spectrum Mode Measurements
Smaart Tech Notes
Tech Note #5: Loudspeaker Impedance with Smaart | Paul Henderson provides an in-depth look at loudspeaker impedance measurement and related issues in using SIA SmaartLive 5. |
Tech Note #4: Signal Alignment & Transfer Function Measurement Data | How signal alignment (or lack thereof) affects phase and frequency response as well as the coherence of Transfer Function measurements. |
De-mystifying Data Windows functions, plus some straight answers about what they are, how and why they are used, and different window types. | |
Tech Note #2: Using the Smaart Pro Delay Locator | Tips on how to get the best results from the Real-Time module's Delay Locator. Includes measurement examples and troubleshooting advice. |
Tech Note #1: Transfer Function Measurement Configurations | Suggestions on how to configure a test setup for Transfer Function and Delay Locator measurements. Includes diagrams for typical configurations. |
Smaart Case Studies
Case Study #9: Interaction of Low-Frequency Drivers and Subwoofers in Dance Systems | Optimizing a club system; it was a situation where many thought that room acoustics were creating a muddy LF and sub-bass sound, but analysis revealed something very different as the culprit. |
Case Study #8: Polarity and its Effect on a Two-Way Loudspeaker | Also looks at the effects of Room modes on Measurements in (relatively) small rooms. Basic techniques, reversed polarity in a two-way loudspeaker and more. |
Case Study #7: Measuring a Measurement Microphone | Michael Moe demonstrates a technique he devised for measuring microphone response. Click here to download the measurement data. (File requires Smaart v2.1 or higher to open) |
Case Study #6: Time Correction in a Concert System | The use of time correction in a concert system for a rock artist, including "pushing" the main PA system "back" to align with the band's backline for seamless integration between the stage sound and main PA. Also click here for impulse response wav files. |
Case Study #5: Live Music Show in a Midsize Auditorium | Don Pearson provides a look at his approach to tuning up an installed sound reinforcement system for a live musical performance, along with tips on ways to use Smaart Pro for system setup and monitoring during a show. |
Case Study #4: Multi-Cluster Reinforcement System in a Large Church | Paul Henderson discusses his use of Smaart Pro Real-Time and Analysis modules to detect acoustical problems and optimize the main system in a 1,200-seat church. Click here for a reference group file of the system response. (File requires Smaart v2.1 or higher to open) |
Case Study #3: Two-Way Bi-Amplified Loudspeaker in Critical Listening Environment | An approach to measuring a "multi-way" loudspeaker system using Smaart Pro, also touching upon room modes, the FPPO Transfer Function and more. Click Here for measurement data shown in the PDF document (contained in .zip file) |
Case Study #2: Home Theater / Listening Room | Addresses problems one might also encounter in a small studio control room or smaller listening spaces. Click here for a reference file of a loudspeaker system response and click here for an impulse response wav file. |
Case Study #1: Domed Stadium | How the Smaart Pro Analysis module was used to measure and document acoustical properties in an extremely large room. Also, click here for a wav file of the room's impulse response measured using the Real-Time module's Delay Locator. |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article